Skip to main content Skip to search Skip to main navigation

Ceramic filter Pre-filter for drinking water filter

Product information "Ceramic filter Pre-filter for drinking water filter"


High-density ceramic filter

The high-density ceramic works like a sieve that retains all substances larger than 0.2 microns (0.0002 mm). (For comparison: an average human hair is about 0.05 to 0.08 mm thick).

Due to its fine pore size (new ISO standard 12-2, valid since 1 March 2010), no bacteria can get through. These have a size of 0.3 - 10 microns. The Austrian Institute of Technology was able to clearly demonstrate the effectiveness of the ceramic filter in terms of impermeability to germs and bacteria: "The germs (CFU's), coliform bacteria, Escherichia coli and enterococci present in the raw water were removed 100% or are no longer detectable in the filtered water." This provides effective protection against germs.

The filter should be replaced every 24 months. If it has become discoloured due to the retained impurities, the water will only be filtered slowly. If necessary, clean it with a clean kitchen sponge and light scrubbing movements.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Recommended for your selection

Loading...
Upload in progress, please be patient ...